|Table of Contents|

[1] Nguyen Van Liem, Zhang Jianrun, Lu Xi, et al. Low-frequency ride comfort of vibratory rollersequipped with cab hydro-pneumatic mounts [J]. Journal of Southeast University (English Edition), 2020, 36 (3): 278-284. [doi:10.3969/j.issn.1003-7985.2020.03.005]
Copy

Low-frequency ride comfort of vibratory rollersequipped with cab hydro-pneumatic mounts()
基于振动压路机驾驶室液压气隔振的低频率平顺性
Share：

Journal of Southeast University (English Edition)[ISSN:1003-7985/CN:32-1325/N]

Volumn:
36
Issue:
2020 03
Page:
278-284
Research Field:
Traffic and Transportation Engineering
Publishing date:
2020-09-20

Info

Title:
Low-frequency ride comfort of vibratory rollersequipped with cab hydro-pneumatic mounts
基于振动压路机驾驶室液压气隔振的低频率平顺性
Author(s):
Nguyen Van Liem1;  2;  Zhang Jianrun1;  Lu Xi1;  Huang Dacheng1
1School of Mechanical Engineering, Southeast University, Nanjing 211189, China
2School of Mechanical and Electrical Engineering, Hubei Polytechnic University, Huangshi 435003, China
阮文廉1;  2;  张建润1;  卢熹1;  黄大成1
1东南大学机械工程学院, 南京 211189; 2湖北理工学院机电工程学院, 黄石 435003
Keywords:
vibratory roller;  quality ride;  hydro-pneumatic mount;  low-frequency vibrations
振动压路机;  平顺性;  液压气隔振系统;  低频率振动
PACS:
U461.3
DOI:
10.3969/j.issn.1003-7985.2020.03.005
Abstract:
Based on the advantages of hydraulic and pneumatic mounts, a new hydro-pneumatic mount(HPM)is proposed to improve the low-frequency ride comfort of vibration rollers. Through the experiment of the vibratory roller, a nonlinear vehicle dynamic model working on off-road soil grounds is then established to assess the HPM’s ride comfort in the low-frequency region. Two indices, the power spectral density(PSD)acceleration and root mean square(RMS)acceleration of the operator vibration and cab shaking, are chosen as objective functions in both the frequency and time regions. The research results show that when the cab isolations are equipped with the HPM, the RMS values of the operator’s seat, cab’s pitch and roll angles are reduced by 35%, 42% and 53%; and the maximum PSD of the operator’s seat, cab’s pitch and roll angles are decreased by 39%, 59% and 65%, respectively. Consequently, the characteristics of the nonlinear damper and high-static stiffness of HPM can greatly reduce the operator vibration and cab shaking in the low-frequency region when compared to the vibratory roller’s cab using the rubber mounts.
基于液压和气动隔振的优势, 提出了一种新型的液压气隔振(HPM), 以提高振动压路机的低频率平顺性.通过振动压路机的实验, 建立了在地面变形上相互作用的非线性整车动力学模型, 以分析HPM在低频率范围的平顺性.在低频率和时间范围中, 以驾驶员振动和驾驶室晃动的功率谱密度加速度(PSD)与加权加速度均方根值(RMS)2个指标为目标函数.研究结果表明:驾驶室隔振配备了HPM, 驾驶室座椅垂向振动, 驾驶室的俯仰和倾斜晃动的RMS值分别降低了35%、42%和53%;驾驶室座椅垂向振动, 驾驶室的俯仰和倾斜晃动的最大PSD值分别降低了39%、59%和65%.因此, 在低频率范围中, 与使用橡胶隔振的振动压路机驾驶室相比, HPM的非线性阻尼与高静态刚度的特性对减少驾驶员振动和控制驾驶室晃动有明显的影响.

References:

[1] Nguyen V L, Zhang J R, Hua W L, et al. Ride quality evaluation of the vibratory roller cab supplemented by auxiliary hydraulic mounts via simulation and experiment [J]. Journal of Southeast University(English Edition), 2019, 35(3): 273-280. DOI: 10.3969/j. issn.1003-7985. 2019. 03.001.
[2] Kordestani A, Rakheja S, Marcotte P, et al. Analysis of ride vibration environment of soil compactors[J]. SAE International Journal of Commercial Vehicles, 2010, 3(1): 259-272. DOI:10.4271/2010-01-2022.
[3] Wong J Y. Data processing methodology in the characterization of the mechanical properties of terrain[J].Journal of Terramechanics, 1980, 17(1): 13-41. DOI:10.1016/0022-4898(80)90014-2.
[4] Adam D, Kopf F. Theoretical analysis of dynamically loaded soils [C]//Proceedings of European Workshop Compaction of Soils and Granular Materials. Paris, France, 2000: 207-220.
[5] Jiao G. Vibration simulation and optimization of cab’s vibration isolation system of vibratory roller [D]. Nanjing: Southeast University, 2010.(in Chinese)
[6] de Temmerman J, Deprez K, Hostens I, et al. Conceptual cab suspension system for a self-propelled agricultural machine: Part 2: Operator comfort optimisation[J]. Biosystems Engineering, 2005, 90(3): 271-278. DOI:10.1016/j.biosystemseng.2004.08.007.
[7] Li J Q, Zhang Z F, Xu H G, et al. Dynamic characteristics of the vibratory roller test-bed vibration isolation system: Simulation and experiment[J]. Journal of Terramechanics, 2014, 56: 139-156. DOI:10.1016/j.jterra.2014.10.002.
[8] Sun X J, Zhang J R. Performance of earth-moving machinery cab with hydraulic mounts in low frequency[J]. Journal of Vibration and Control, 2014, 20(5): 724-735. DOI:10.1177/1077546312464260.
[9] Lee P, Vogt J, Han S Z. Application of hydraulic body mounts to reduce the freeway hop shake of pickup trucks[C]//SAE Technical Paper Series. Warrendale, PA, USA: SAE International, 2009. DOI:10.4271/2009-01-2126.
[10] Jiao S J, Wang Y, Zhang L, et al. Shock wave characteristics of a hydraulic damper for shock test machine[J]. Mechanical Systems and Signal Processing, 2010, 24(5): 1570-1578. DOI:10.1016/j.ymssp.2009.12.005.
[11] Sundvall P. Comparisons between predicted and measured ride comfort in trains-a case study on modeling[R]. Stockholm, Sweden: Department of Vehicle Engineering, Royal Institute of Technology, 2001.
[12] Presthus M. Derivation of air spring model parameters for train simulation[D]. Lulea, Sweden: Lulea University of Technology, 2002.
[13] Abid H J, Chen J, Nassar A A. Equivalent air spring suspension model for quarter-passive model of passenger vehicles[J]. International Scholarly Research Notices, 2015, 2015: 1-6. DOI:10.1155/2015/974020.
[14] Yan J, Yin Z, Guo X X, et al. Fuzzy control of semi-active air suspension for cab based on genetic algorithms[C]//SAE Technical Paper Series. Warrendale, PA, USA: SAE International, 2008:1-11. DOI:10.4271/2008-01-2681.
[15] Tang G, Zhu H J, Zhang Y Q, et al. Studies of air spring mathematical model and its performance in cab suspension system of commercial vehicle[C]//SAE Technical Paper Series.Warrendale, PA, USA:SAE International, 2015: 341-348. DOI:10.4271/2015-01-0608.
[16] Nguyen V, Zhang J R, Le V, et al. Vibration analysis and modeling of an off-road vibratory roller equipped with three different cab’s isolation mounts[J]. Shock and Vibration, 2018, 2018: 1-17. DOI:10.1155/2018/8527574.
[17] International Organization for Standardization. ISO 2631-1 Mechanical vibration and shock-Evaluation of human exposure to whole body vibration—Part 1: General requirements [S]. Geneve, Switzerland: International Organization for Standardization, 1997.
[18] Seo J U, Yun Y W, Park M K. Magneto-rheological accumulator for temperature compensation in hydropneumatic suspension systems[J]. Journal of Mechanical Science and Technology, 2011, 25(6): 1621-1625. DOI:10.1007/s12206-011-0414-z.
[19] Ali D, Frimpong S. Artificial intelligence models for predicting the performance of hydro-pneumatic suspension struts in large capacity dump trucks[J]. International Journal of Industrial Ergonomics, 2018, 67: 283-295. DOI:10.1016/j.ergon.2018.06.005.
[20] Berg M. A three-dimensional airspring model with friction and orifice damping[J]. Vehicle System Dynamics, 1999, 33(sup1): 528-539. DOI:10.1080/00423114.1999.12063109.

Memo

Memo:
Biographies: Nguyen Van Liem(1986—), male, doctor; Zhang Jianrun(corresponding author), male, doctor, professor, zhangjr@seu.edu.cn.
Foundation items: The National Key Research and Development Plan(No.2019YFB2006402), Talent Introduction Fund Project of Hubei Polytechnic University(No.19XJK17R), the Joint Key Project Founded by Southeast University and Nanjing Medical University(No.2019DN0011).
Citation: Nguyen Van Liem, Zhang Jianrun, Lu Xi, et al. Low-frequency ride comfort of vibratory rollers equipped with cab hydro-pneumatic mounts[J].Journal of Southeast University(English Edition), 2020, 36(3):278-284.DOI:10.3969/j.issn.1003-7985.2020.03.005.
Last Update: 2020-09-20