|Table of Contents|

[1] Xu Lina, **, Zhou Kaichang, Liu Chunping, et al. Investigation on Quick Surface Metallizationof Nano Titania Powder* [J]. Journal of Southeast University (English Edition), 2002, 18 (1): 92-94. [doi:10.3969/j.issn.1003-7985.2002.01.018]
Copy

Investigation on Quick Surface Metallizationof Nano Titania Powder*()
Share:

Journal of Southeast University (English Edition)[ISSN:1003-7985/CN:32-1325/N]

Volumn:
18
Issue:
2002 1
Page:
92-94
Research Field:
Chemistry and Chemical Engineering
Publishing date:
2002-03-30

Info

Title:
Investigation on Quick Surface Metallizationof Nano Titania Powder*
Author(s):
Xu Lina1 2** Zhou Kaichang1 Liu Chunping2 Ou Danlin2 Gu Ning1 Liu Juzheng2 Chen Kunji3
1National Laboratory of Molecular and Biomolecular Electronics, Southeast University, Nanjing 210096, China
2Department of Chemistry and Chemical Engineering, Southeast University, Nanjing 210096, China
3Laboratory
Keywords:
electroless chemical deposition nickel metallization nano titania
PACS:
O647.11
DOI:
10.3969/j.issn.1003-7985.2002.01.018
Abstract:
Quick surface metallization of titania powder was carried out by electroless chemical deposition of nickel. The fabricated product was characterized by XRD, SEM, FTIR and cross-section metallography. The analysis results show that titania particles are completely coated by a thin nickel shell about 600 nm thick, composed of nano-sized crystalline nickel particles. Mechanism of nickel chemical deposition on nano powder is proposed.

References:

[1] Leon C A, Drew R A L. Preparation of nickel-coated powders Al2O3 and SiC as precursors to reinforce MMCs[J]. J Mater Sci, 2000, 35:4763-4768.
[2] Lin L, Xue Q J, Zhao J Z. Microstructure and tribological behaviour of electroless Ni-P plating reinforced by fine TiN powders[J]. Tribology, 1995, 15(2): 104-104.
[3] Chang S Y, Lin J H, Lin S J, et al. Processing copper and silver matrix composites by electroless plating and hot pressing[J]. Metallur & Mater Trans A, 1999, 30(4): 1119-1136.
[4] Joshi P B, Murti N S S, Gadgeel V L, et al. Preparation and characterization of Ag-ZnO powders for applications in electrical contact materials[J]. J Mater Sci Lett, 1995, 14:1099-1101.
[5] Harizanov O A, Stefchev P L, Iossifova A. Metal coated alumina powder for metalloceramics [J]. Mater Lett, 1998, 33(5-6):297-299.
[6] Wen G W, Guo Z X, Davies C. Electroless plating for the enhancement of material performance[J]. Mater Tech, 1999, 14:210-217.
[7] Wang C Y, Zhou Y, Zhu Y R, et al. Synthesis and characterization of NiP-TiO2 ultrafine composite particles[J]. Mater Sci & Eng, 2000, B77(1):135-137.
[8] Li Y D, Li C W, Wang H R, et al. Preparation of nickel ultrafine powder and crystalline film by chemical control reduction[J]. Mater Chem & Phys, 1999, 59:88-90.

Memo

Memo:
* The project supported by the National Natural Science Foundation of China(69890220)and Open Project Foundation of Laboratory of Solid State Microstructures of Nanjing University.
** Born in 1969, female, graduate.
Last Update: 2002-03-20