|Table of Contents|

[1] Hua Guoran, **, Zhao Jianfeng, Zhang Jianhua, et al. Rapid Manufacturing of Metal Parts* [J]. Journal of Southeast University (English Edition), 2002, 18 (2): 123-127. [doi:10.3969/j.issn.1003-7985.2002.02.005]
Copy

Rapid Manufacturing of Metal Parts*()
Share:

Journal of Southeast University (English Edition)[ISSN:1003-7985/CN:32-1325/N]

Volumn:
18
Issue:
2002 2
Page:
123-127
Research Field:
Mechanical Engineering
Publishing date:
2002-06-30

Info

Title:
Rapid Manufacturing of Metal Parts*
Author(s):
Hua Guoran1 2** Zhao Jianfeng1 Zhang Jianhua1 Huang Yinhui1 Yu Chengye1
1Rapid Prototyping and Manufacturing Center, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
2Nantong Institute of Technology, Nantong 226007, China
Keywords:
SLS metal parts rapid manufacturing
PACS:
TH16;TG665
DOI:
10.3969/j.issn.1003-7985.2002.02.005
Abstract:
As a key technology of rapid prototyping and manufacturing(RP&M), rapid manufacturing of metal parts is a target of RP&M. Introducing selective laser sintering(SLS), an important branch of RP&M, this paper gives a new method oriented on low-power SLS system to fabricate metal parts. With this kind of technology, the mixture of metal and polymer powder is sintered first to get green part, then, after debinding and metal infiltration, dense parts are gotten. In the end, influencing factors of this technology are analyzed. At the same time, some applications are given.

References:

[1] Anna Kochan. Rapid prototyping trends[J]. Rapid Prototyping Journal, 1997, 3(4):150-152.
[2] Carol Anderson. Rapid prototyping and manufacturing in the USA [J]. Rapid prototyping Journal, 1997, 3(3): 120-121.
[3] Terry T Wohlers. Worldwide developments and trends in rapid prototyping & tooling[A]. In: Yan Yongnian, ed. Proceeding of the First International Conference on Rapid Prototyping & Manufacturing[C]. Beijing, 1998.
[4] Gerken J, Haferkamp H, Schmidt H. Rapid prototyping/manufacturing of metal components by laser clading[A]. In: Proceedings of the 27th ISATA[C]. Aachen, Automotive Automation Ltd, Croydon, 1994.
[5] Michael Greulich, Matthias Greul, Theo Pintat. Fast, functional prototypes via multiphase jet solidification[J]. Rapid Prototyping Journal, 1995, 1(1):20-25.
[6] Kruth J P. Material incress manufacturing by rapid prototyping techniques[A]. In: Krurh, ed. Annals of the CIRP[C].Katholieke University, Leuven, 1991.
[7] Chua Chee Kai, Gan G K, Jacob. Interface between CAD and rapid prototyping systems. Part 1: A study of existing interfaces[J]. International Journal of Advanced Manufacturing Technology, 1997, 13:566-570.

Memo

Memo:
* The project supported by the National Natural Science Foundation of China(59935110).
** Born in 1964, male, doctor, associate professor.
Last Update: 2002-06-20