|Table of Contents|

[1] Wu Jianguo**, Sun Qinghong, Mao Haijun, Yu Wenkai, et al. Dynamic Characteristics of Transmission Systemfor the Internal Grinder* [J]. Journal of Southeast University (English Edition), 2002, 18 (4): 302-305. [doi:10.3969/j.issn.1003-7985.2002.04.003]
Copy

Dynamic Characteristics of Transmission Systemfor the Internal Grinder*()
Share:

Journal of Southeast University (English Edition)[ISSN:1003-7985/CN:32-1325/N]

Volumn:
18
Issue:
2002 4
Page:
302-305
Research Field:
Mechanical Engineering
Publishing date:
2002-12-30

Info

Title:
Dynamic Characteristics of Transmission Systemfor the Internal Grinder*
Author(s):
Wu Jianguo1** Sun Qinghong1 Mao Haijun1 Yu Wenkai2 Cai Ying2
1Department of Mechanical Engineering, Southeast University, Nanjing 210096, China
2Wuxi Machine Tool Co.Ltd., Wuxi 214061, China
Keywords:
transmission system dynamic characteristic modal flexibility elasticity distribution rate
PACS:
TH114
DOI:
10.3969/j.issn.1003-7985.2002.04.003
Abstract:
The dynamics model of the transmission system of the internal grinder is established on the bases of Riccati transfer matrix. The dynamic characteristics of the internal grinder are obtained by analyzing the relationship between dynamic modal flexibility and modal flexibility, which is used to find out the dangerous model of the transmission system and its weak areas. Then design parameters of weak areas are modified, the new one from the old structure is put forward, and the dynamic characteristics of new structure are forecast through the calculations of the modal flexibility and elasticity distribution rate. This method is applied successfully in designing the transmission system of the internal grinder.

References:

[1] Du Jiesheng. Test, monitor and instruments of torsional vibration for spindles system[M]. Nanjing: Southeast University Press, 1994.1-5.(in Chinese)
[2] Horner G C.Pilkey W D. The Riccati transfer matrix method [J]. Journal of Design Trans of ASME, 1978, 100:297-302.
[3] Yuan Bijun, Yu Haomin. Application of Riccati transfer matrix method to critical speed analysis of high-speed spindle on ring frame[J]. Journal of China Textile University, 1993, 10:8-16.
[4] Xu Yanshen. Design of mechanical dynamics[M]. Beijing: China Machine Press, 1992.(in Chinese)
[5] Tang Yike. Design method of dynamic optimum for main shaft of machine tool[J]. Journal of Chongqing University, 1987(3):39-46.(in Chinese)
[6] Tang Yike, Zhang Jisheng. Identification of supporting parameters of main shaft for machine tool[A]. In: Proceedings of the Third Annual Conference on Mechanical Machining, China Society of Mechanical Engineering[C].Beijing: China Machine Press, 1982(1):197-207.(in Chinese)

Memo

Memo:
* The project supported by the Ninth Five Important Industrial Project of Jiangsu Province(GB98002—2).
** Born in 1960, male, associate professor.
Last Update: 2002-12-20