|Table of Contents|

[1] Li Fan, Huang Haibo, Wu Bingyao,. Experimental study of amorphous andnanocrystalline Fe-based alloy [J]. Journal of Southeast University (English Edition), 2004, 20 (2): 209-211. [doi:10.3969/j.issn.1003-7985.2004.02.017]
Copy

Experimental study of amorphous andnanocrystalline Fe-based alloy()
Share:

Journal of Southeast University (English Edition)[ISSN:1003-7985/CN:32-1325/N]

Volumn:
20
Issue:
2004 2
Page:
209-211
Research Field:
Materials Sciences and Engineering
Publishing date:
2004-06-30

Info

Title:
Experimental study of amorphous andnanocrystalline Fe-based alloy
Author(s):
Li Fan Huang Haibo Wu Bingyao
Department of Materials Science and Engineering, Southeast University, Nanjing 210096, China
Keywords:
nanocrystalline mechanical alloying FeNiPB(Cu Nb)alloy
PACS:
TG132.2+71;TG139+.8
DOI:
10.3969/j.issn.1003-7985.2004.02.017
Abstract:
The mechanical alloying of FeNiPB(Cu, Nb)mixed powders was studied by X-ray diffraction(XRD), transition electron microscope(TEM), scanning electron microscopy(SEM)and extended X-ray absorption fine structure(EXAFS). The results show that the FeNiPB(Cu, Nb)mixed powders alloy after milling for 20 h, as the milling time increases to 80 h, Fe and Ni atoms are in an amorphous environment, the morphology of FeNiPB(Cu, Nb)mixed powders appears as cotton fiber and its electron diffraction pattern shows a typically diffuse amorphous halo. So FeNiPB(Cu, Nb)mixed powders transform to amorphous state under this condition. After the FeNiPB(Cu, Nb)amorphous alloy was heated at 520 ℃ for 1 h, the nanocrystalline FeNiPB(Cu, Nb)was produced. So, the Fe-based nanocrystalline alloy can be prepared by partially crystallizing the FeNiPB(Cu, Nb)amorphous alloy.

References:

[1] Jartych E, Zurawicz J K, Oleszak D, et al. Magnetic properties and structure of nanocrystalline Fe-Al and Fe-Ni alloys [J]. Nanostructured Materials, 1999, 12(5-8): 927-930.
[2] Passamani E C, Tagarro J R B, Nunes E, et al. Magnetic and magnetotransport properties of nanocrystalline(Fe2B)0. 20X0. 80(X=Ag or Cu)alloys prepared by mechanical alloying [J]. Journal of Magnetism and Magnetic Materials, 2002, 247(2): 191-199.
[3] Manivel R M, Chattopadhyay K, Majumdar B, et al. Structure and soft magnetic properties of finement alloys [J]. Journal of Alloys and Compounds , 2000, 297(1, 2): 199-205.
[4] Kolano A, Mateja-Kaczmarsk K. The influence of post-annealing cooling rates on magnetic properties of Fe-based nanocrystalline alloy [J]. Journal of Magnetism and Magnetic Materials, 2003, 254, 255(1): 431-433.
[5] Chicinas I, Pop V, Lsnard O, et al. Synthesis and magnetic properties of Ni3Fe intermetallic compound obtained by mechanical alloying [J]. Journal of Alloy and Compound, 2003, 352(1, 2): 34-40.

Memo

Memo:
Biography: Li Fan(1958—), female, associate professor, sem@seu.edu.cn.
Last Update: 2004-06-20