|Table of Contents|

[1] Li Min, Wu Zhishen, Chen Zhenqian, et al. Effect of carbon fiber on thermal propertiesof n-Docosane phase change materials [J]. Journal of Southeast University (English Edition), 2010, 26 (2): 346-350. [doi:10.3969/j.issn.1003-7985.2010.02.045]
Copy

Effect of carbon fiber on thermal propertiesof n-Docosane phase change materials()
Share:

Journal of Southeast University (English Edition)[ISSN:1003-7985/CN:32-1325/N]

Volumn:
26
Issue:
2010 2
Page:
346-350
Research Field:
Chemistry and Chemical Engineering
Publishing date:
2010-06-30

Info

Title:
Effect of carbon fiber on thermal propertiesof n-Docosane phase change materials
Author(s):
Li Min1 2 Wu Zhishen2 Chen Zhenqian2 Peng Changhai2
1Jiangsu Province Key Laboratory of Construction Materials, Southeast University, Nanjing 211189, China
2Low-Carbon Building Environment Equipment and System Energy-Saving Engineering Center of Ministry of Education, Southeast University, Nanjing 210096, China
Keywords:
phase change material carbon fiber thermal conductivity n-Docosane
PACS:
TQ0
DOI:
10.3969/j.issn.1003-7985.2010.02.045
Abstract:
The improvement of the heat transfer rate of phase change material(PCM)is studied by mixing with carbon fiber(CF)which is a good heat conductor. The composite PCM is prepared by blending CF and n-Docosane and its thermal performance is tested using the method of differential scanning calorimetry(DSC)analysis and thermogravimetric/differential thermal analysis(TG/DTA). In addition, the influence of the mixing amount and the length of CF on the thermal conductivity of n-Docosane are investigated. The results show that CF can significantly improve the heat transfer rate of n-Docosane, and the mixing amount and the length of CF are two influence factors. The heat storage and release rates increase with the increase in the mixing amount of CF. Moreover, the melting point of n-Docosane is increased from 40.2 to 50.8 ℃ after being mixed with CF. The heating time is decreased from 720 to 660 s by mixing with 6% of CF, and is decreased to 600 s by mixing with 10% of CF.

References:

[1] Demirbas M F. Thermal energy storage and phase change materials: an overview[J]. Energy Sources, Part B—Economics Planning and Policy, 2006, 1(1): 85-95.
[2] Zalba B, Marin J M, Cabeza L F, et al. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications[J]. Applied Thermal Engineering, 2003, 23(3): 251-283.
[3] Sharma A, Tyagi V V, Chen C R, et al. Review on thermal energy storage with phase change materials and applications[J]. Renewable and Sustainable Energy Reviews, 2009, 13(2): 318-345.
[4] Sarier N, Onder E. Thermal characteristics of polyurethane foams incorporated with phase change materials[J]. Thermochimica Acta, 2007, 454(2): 90-98.
[5] Athienitis A K, Liu C, Hawes D, et al. Investigation of the thermal performance of a passive solar test-room with wall latent heat storage[J]. Building Environ, 1997, 32(5):405-410.
[6] Stetiu C, Feustel H E. Phase change wallboard as an alternative to compressor cooling in Californian residences[C]//Proceedings of ACEE Summer Study for Energy Efficient Building. Asilomar, CA, USA, 1996: 157-163.
[7] Krupa I, Mikova G, Luyt A S. Phase change materials based on low-density polyethylene/paraffin wax blends[J]. European Polymer Journal, 2007, 43(9):4695-4705.
[8] Zheng L H, Song G S, Wei Y L, et al. Preparation of figuration phase change material with gypsum as supporting material and its thermal characteristics[J]. New Building Materials, 2006, 33(1):49-50.(in Chinese)
[9] Lin K P, Zhang Y P, Di H F, et al. Study of an electrical heating system with ductless air supply and shape-stabilized PCM for thermal storage[J]. Energy Conversion and Management, 2007, 48(7): 2016-2024.
[10] Zhang Y P, Lin K P, Yang R, et al. Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings[J]. Energy and Building, 2006, 38(10):1262-1269.
[11] Mesalhy O, Lafdi K, Elgafy A. Carbon foam matrices saturated with PCM for thermal protection purpose[J]. Carbon, 2006, 44(10):2080-2088.
[12] Sari A. Form-stable paraffin/high density polyethylene composites as solid-liquid phase change material for thermal energy storage: preparation and thermal properties[J]. Energy Conversion and Management, 2004, 45(13): 2033-2042.

Memo

Memo:
Biography: Li Min(1974—), female, doctor, associate professor, limin.li@163.com.
Foundation items: The National Natural Science Foundation of China(No.50808042), the National Key Technology R& D Program of China during the 11th Five-Year Plan Period(No.2007BA000875-04), Six Projects Sponsoring Talent Summits of Jiangsu Province, Outstanding Young Teacher Funding Schemes of Southeast University, Open Fund of Key Laboratory of Inorganic and Composite Materials of Jiangsu Province(No.wjjqfhxcl200703), the Scientific Research Foundation for the Returned Overseas Chinese Scholars, State Education Ministry.
Citation: Li Min, Wu Zhishen, Chen Zhenqian, et al.Effect of carbon fiber on thermal properties of n-Docosane phase change materials[J].Journal of Southeast University(English Edition), 2010, 26(2):346-350.
Last Update: 2010-06-20