|Table of Contents|

[1] Zheng Enlai, Jia FangZhang Zhisheng, Shi Jinfei,. Load spectrum analysis for combined frame of closed high-speed press [J]. Journal of Southeast University (English Edition), 2011, 27 (1): 40-46. [doi:10.3969/j.issn.1003-7985.2011.01.009]
Copy

Load spectrum analysis for combined frame of closed high-speed press()
Share:

Journal of Southeast University (English Edition)[ISSN:1003-7985/CN:32-1325/N]

Volumn:
27
Issue:
2011 1
Page:
40-46
Research Field:
Automation
Publishing date:
2011-03-30

Info

Title:
Load spectrum analysis for combined frame of closed high-speed press
Author(s):
Zheng Enlai Jia FangZhang Zhisheng Shi Jinfei
School of Mechanical Engineering, Southeast University, Nanjing 211189, China
Keywords:
press load spectrum crank shaft slider-crank mechanism
PACS:
TP113.1
DOI:
10.3969/j.issn.1003-7985.2011.01.009
Abstract:
Based on the basic theory of mechanics, kinematic and dynamic analysis for a slider-crank mechanism with a balance mechanism is performed. The theoretical formula of the load spectrum for the interaction between the crank shaft and the bearing seat of the upper beam is achieved by approximately simplifying the mechanical model of the crank shaft. The simulation for the load spectrum data of combined frame under the operating conditions of blanking or piling is performed using Matlab and the law of the load spectrum curves under these two conditions is analyzed. The simulation results show that under a no-load condition, the load spectrum curves of the interaction between the crank shaft and the bearing seat of the upper beam present a form of periodic sine wave and under the piling condition, the load spectrum curves of the interaction between the crank shaft and the bearing seat of the upper beam present a form of periodic pulse wave. The simulation results can provide a theoretical foundation for the load determination during the process of analyzing the dynamic characteristics on the combined frame of a closed high-speed press through the finite element method.

References:

[1] Hahn H. Mathematische modelle masseloser gelenke zur simulation räumlicher bewegungen von Starrkopersystemen [R]. Kassel: Department of Mechanical Engineering of Kassel University, 1988.
[2] Wagener H W, Neumann M. Rechnergestutzte analyse des dynamischen verhaltens mechanischer pressen [R]. Kassel: Department of Mechanical Engineering of Kassel University, 1997.
[3] Neumann M, Hahn H. Computer simulation and dynamic analysis of a mechanical press based on different engineer models[J]. Mathematics and Computers in Simulation, 1998, 46(5): 559-574.
[4] Lieh Junghsen. Dynamic modeling of a slider-crank mechanism with coupler and joint flexibility[J]. Mechanism and Machine Theory, 1994, 29(1): 139-147.
[5] Mukras S, Mauntler N, Kim N H, et al. Dynamic modeling of a slider-crank mechanism under joint wear[C]//Proceedings of the 32nd Annual Mechanism and Robotics Conference. New York, 2008: 443-452.
[6] Lee H J. Dynamics and probabilistic fatigue analysis schemes for high-speed press machines[J]. Computers and Structures, 1994, 55(1): 11-19.
[7] Zhang Xiaoyang, Wang Xingsong, Jia Fang, et al. Dynamic balance optimization on high speed crank press[J]. Forging and Stamping Technology, 2006, 31(6): 94-99.
[8] Mao Jun, Zhang Xiaoyang. Study on the dynamic balance optimization of high speed crank press[J]. Journal of Jinling Institute of Technology, 2007, 23(4): 4-9.(in Chinese)
[9] Yao Yan. Elastodynamic research and computer simulation of high-speed press[D]. Xi’an: Mechanical Engineering of Xi’an University of Technology, 2007.(in Chinese)
[10] Lin Haiou. Vibration research of high speed press and computer simulation[D]. Xi’an: Mechanical Engineering of Xi’an University of Technology, 2005:13-17.(in Chinese)

Memo

Memo:
Biographies: Zheng Enlai(1986—), male, graduate; Jia Fang(corresponding author), female, doctor, associate professor, 13851896116@139.com.
Foundation items: The Key Technologies R& D Program of Jiangsu Province(No.BE2006036), Transformation Program of Science and Technology Achievements of Jiangsu Province(No.BA2008030).
Citation: Zheng Enlai, Jia Fang, Zhang Zhisheng, et al. Load spectrum analysis for combined frame of closed high-speed press[J].Journal of Southeast University(English Edition), 2011, 27(1):40-46.[doi:10.3969/j.issn.1003-7985.2011.01.009]
Last Update: 2011-03-20