|Table of Contents|

[1] Nguyen Van Liem, Zhang Jianrun, Hua Wenlin, et al. Ride quality evaluation of the soil compactor cab supplementedby auxiliary hydraulic mounts via simulation and experiment [J]. Journal of Southeast University (English Edition), 2019, 35 (3): 273-280. [doi:10.3969/j.issn.1003-7985.2019.03.001]
Copy

Ride quality evaluation of the soil compactor cab supplementedby auxiliary hydraulic mounts via simulation and experiment()
Share:

Journal of Southeast University (English Edition)[ISSN:1003-7985/CN:32-1325/N]

Volumn:
35
Issue:
2019 3
Page:
273-280
Research Field:
Traffic and Transportation Engineering
Publishing date:
2019-09-30

Info

Title:
Ride quality evaluation of the soil compactor cab supplementedby auxiliary hydraulic mounts via simulation and experiment
Author(s):
Nguyen Van Liem1 2 Zhang Jianrun1 Hua Wenlin2 Wang Peiling2
1School of Mechanical Engineering, Southeast University, Nanjing 211189, China
2School of Mechanical and Electrical Engineering, Hubei Polytechnic University, Huangshi 435003, China
Keywords:
off-road soil compactor dynamic model cab’s rubber mounts auxiliary hydraulic mount ride quality
PACS:
U461.3
DOI:
10.3969/j.issn.1003-7985.2019.03.001
Abstract:
In order to evaluate the ride quality of the soil compactor cab supplemented by the auxiliary hydraulic mounts(AHM), a nonlinear dynamic model of the soil compactor interacting with the off-road deformable terrain is established based on Matlab/Simulink sofware. The power spectral density(PSD)and the weighted root mean square(RMS)of acceleration responses of the vertical driver’s seat, the cab’s pitch and roll angle are chosen as objective functions in low-frequency range. Experimental investigation is also used to verify the accuracy of the model. The influence of the damping coefficients of the AHM on the cab’s ride quality is analyzed, and damping coefficients are then optimized via a genetic algorithm program. The research results show that the cab’s rubber mounts added by the AHM clearly improve the ride quality under various operating conditions. Particularly, with the optimal damping coefficients of the front-end mounts ca1, 2 = 1 500 N·s/m and of the rear-end mounts ca3, 4 =2 335 N·s/m, the weighted RMS values of the driver’s seat, the cab’s pitch and roll angle are reduced by 22.2%, 18.8%, 58.7%, respectively. Under the condition of the vehicle travelling, with the optimal damping coefficients of ca1, 2 = 1 500 N·s/m and ca3, 4 =1 882 N·s/m, the maximum PSD values of the driver’s seat, the cab’s pitch and roll angle are clearly decreased by 36.7%, 54.7% and 50.6% under the condition of the vehicle working.

References:

[1] Bekker M. Introduction to terrain-vehicle systems[M]. Ann Arbor, USA: University of Michigan Press, 1969.
[2] Wong J. Theory of ground vehicles[M]. New York, NY, USA: John Wiley & Sons, 2001.
[3]Mitschke M. Dynamik der Kraftfahrzeuge[M]. Berlin: Springer-Verlag, 1972. DOI:10.1007/978-3-662-11585-5.
[4] Nguyen V L, Zhang J R, Jiao R Q et al. Effect of the off-road terrains on the ride comfort of construction vehicles[J]. Journal of Southeast University(English Edition), 2019, 35(2): 191-197. DOI:10.3969/j.issn.1003-7985.2019.02.008.
[5] Adam D, Kopf F. Theoretical analysis of dynamically loaded soils[C]//Proceedings of European Workshop Compaction of Soils and Granular Materials. Paris, France, 2000: 207-220.
[6] Nguyen V L, Zhang J R, Le V Q, et al. Vibration analysis and modeling of an off-road vibratory roller equipped with three different cab’s isolation mounts [J]. Shock and Vibration, 2018, 2018:8527574-1-8527574-17. DOI: 10.1155/2018/8527574.
[7] Kordestani A, Rakheja S, Marcotte P, et al. Analysis of ride vibration environment of soil compactors[J]. SAE International Journal of Commercial Vehicles, 2010, 3(1): 259-272. DOI:10.4271/2010-01-2022.
[8] Li J Q, Zhang Z F, Xu H G, et al. Dynamic characteristics of the vibratory roller test-bed vibration isolation system: Simulation and experiment[J]. Journal of Terramechanics, 2014, 56: 139-156. DOI:10.1016/j.jterra.2014.10.002.
[9] Le V Q, Nguyen K T. Optimal design parameters of cab’s isolation system for vibratory roller using a multi-objective genetic algorithm[J]. Applied Mechanics and Materials, 2018, 875: 105-112. DOI:10.4028/www.scientific.net/amm.875.105.
[10] International Organization for Standardization. ISO/TC108/SC2/WG4 N57 Reporting vehicle road surface irregularities [S]. Stuttgart, Germany: Thieme Medical Publishers, 1982.
[11] International Organization for Standardization. ISO 2631-1 Mechanical vibration and shock—Evaluation of human exposure to whole body vibration—Part 2: General requirement [S]. Geneva, Switzerland: International Organization for Standardization, 1997.
[12] Nariman-Zadeh N, Salehpour M, Jamali A, et al. Pareto optimization of a five-degree of freedom vehicle vibration model using a multi-objective uniform-diversity genetic algorithm(MUGA)[J]. Engineering Applications of Artificial Intelligence, 2010, 23(4): 543-551. DOI:10.1016/j.engappai.2009.08.008.
[13] Crews J H, Mattson M G, Buckner G D. Multi-objective control optimization for semi-active vehicle suspensions[J]. Journal of Sound and Vibration, 2011, 330(23): 5502-5516. DOI:10.1016/j.jsv.2011.05.036.
[14] Wang W, Song Y L, Xue Y B, et al. An optimal vibration control strategy for a vehicle’s active suspension based on improved cultural algorithm[J]. Applied Soft Computing, 2015, 28: 167-174. DOI:10.1016/j.asoc.2014.11.047.

Memo

Memo:
Biographies: Nguyen Van Liem(1986—), male, doctor; Zhang Jianrun(corresponding author), male, doctor, professor, zhangjr@seu.edu.cn.
Foundation items: The Science and Technology Support Program of Jiangsu Province(No.BE2014133), the Prospective Joint Research Program of Jiangsu Province(No.BY2014127-01).
Citation: Nguyen Van Liem, Zhang Jianrun, Hua Wenlin, et al. Ride quality evaluation of the soil compactor cab supplemented by auxiliary hydraulic mounts via simulation and experiment[J].Journal of Southeast University(English Edition), 2019, 35(3):273-280.DOI:10.3969/j.issn.1003-7985.2019.03.001.
Last Update: 2019-09-20